Metrohm Thin-Layer cell Manual de usuario descargar pdf (Pagina 11)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

3 Installation

IC Equipment Thin-Layer cell

￭￭￭￭￭￭￭￭

3.2 Inserting the reference electrode

The measuring cell is supplied without electrodes. Reference electrodes

must be ordered separately.

Insert the reference electrode as follows:

Inserting the reference electrode

The reference electrode itself and one sealing ring are contained in the

packaging for the reference electrode.

Slide the sealing ring over the reference electrode.

Unscrew the fastening screw on the RE connector and remove it.

Insert the reference electrode into the opening with the flat side fac-

ing downward.

Retighten the fastening screw.

Special case: Ag/AgCl reference electrode

The Ag/AgCl reference electrode (6.1257.720) is, in contrast to the other

reference electrodes, permanently connected to the reference electrode

cable.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 28 29

Sin comentarios

Metrohm Thin-Layer cell Manual de usuario Pagina 11